With the growth of the bridges and construction projects we have developed a pouring system for their concrete component using metal moulds for obtaining the bridges components using precast system.

Metal Moulds Advantages:

• Product fair surface
•  High pouring rates
•  No use of metal scaffolds
• Clean work sites due to pouring the concrete in yards.

Unit Components

The Technical Office:

•  The technical office is responsible for the detailed shop drawings according to the design created by the Engineering Unit.

 Manufacturing Unit:

• 4 drilling machines
• A band saw
•  4 cutting wheel disks
•  Group of welding m/c
•  2 overhead cranes (10 tons)

Metal Moulds Products:

• Column Mould of Shendi Bridge in Sudan
  Technical Specifications: Column with circular section of 2m diameter and connections up to 20 m high.

Mould Final Shape	The Product

• Column Mould of Bani Mazar Bridge
  Technical Specifications: Column with rectangular section of 250cm x100cm and connections up to 20m high.

The Product	Mould Final Shape	Mould Design

• Column Mould of El-Marriotia
  Technical Specifications: Column with section of 300cm x 150cm and connections up to 20 meter high.

• Column Mould of Saft El-Labn
  Technical Specifications: Column with section of 250cm x 175cm and connections up to 20 meter high.

• Cross Girder Mould of Saft El-Labn Bridge
  Technical Specifications: Cross grider with 13.88m length, 2m width and varied declination high.

• Longitudinal Girder Mould of Saft El-Labn Bridge
  Technical Specifications: T-shape mould with 27.7m length, and varied width.

• Traffic Partitions Mould
  Technical Specifications: Traffic partition with 40cm high, 3m length and 30cm width (surface contactor).

• Roads Divisions Mould (New Jersey Single/Double)
  Technical Specifications: Road division with 3m length, 3m length and 92cm high.